Thinking about adding recessed GU10 downlight fitting kit but don’t want to tear out your whole ceiling to do it? Luckily you don’t have to, it’s very easy follow our direction:
1 Turn off the power switch.
This is the first step and probably the most important in terms of safety. Make sure that you do this before going any further.
2 Set up a ladder or a chair if your light fixture is too high for you to reach.
Find something that will put you at a comfortable height and allows you to use both hands easily.
3 Wear gloves.
In case any dangous during installation, it’s necessary to wear gloves to protect yourself.
4 Instal Gu10 to socket.
Plug the GU10 base to larger hole of socket, then turn it clockwise until you feel it “snap” into place.
5 Put bulb at right position of fittings
Push wire back up under the metal clip, put bulb at right position of fittings
6 Fix the retaining ring
Last, just fix the retaining ring, thus the bulb will be fixed in the fitting.
It’s very easy, right? If you still have any problem, feel free to contact us.
Send your message to us:
Post time: Dec-25-2017